VooPoo made the VooPoo Panda All-In-One Ultra Portable System with the pod mod vaper in mind. The main goal of an all-in-one system it to make for a convenient, portable vaping experience. These types of devices are great for new vapers and vapers who prefer MTL vaping. VooPoo designed this refillable pod mod system for its namesake, the panda bear. It looks unique, but how does it vape?
The Basics of the VooPoo Panda All-In-One Ultra Portable System
There are several good things that the VooPoo Panda has above some other all-in-one pod mods. First of all, the VooPoo Panda pods have a 5ml juice capacity. They are refillable pods, which often beats buying e-liquid pods that are not refillable. It’s less expensive than the more limited pod systems in this way. You charge the integrated 1100mAh battery of the VooPoo Panda All-In-One Ultra Portable System via the micro-USB port on the bottom of the Panda. The battery on this device seems to last well beyond the average. Typically, the battery on the Panda lasts upward of two days depending on usage. To fully charge the device, it takes about an hour and a half.
The Ergonomic Design Makes for a More Pleasant Vaping Experience
The Panda has a rounded body which fits comfortably in your hand. Thanks to the rubberized coating, it is easy to hold onto and grip. There is a large, oval-shaped firing button on the top of the device, right across from the drip tip, which is also designed to make your vaping feel more ergonomic.
The Pods for the VooPoo Panda All-In-One Ultra Portable System
Depending on which pod you are using, the VooPoo Panda vapes at either 8 or 12W. The Panda pods available for the system are a 1.2-ohm pod for use with nicotine salt e-liquids and a 0.8-ohm pod that works with higher VG vape juice. They are constructed out of a durable polycarbonate.
Like most pod mod devices, you cannot adjust the power settings. The Panda will intuitively adjust your wattage depending on which pod you have placed inside the device. For some vapers, this is a huge disappointment. If you’re big on different vaping mods, this may not be a device for you. However, the VooPoo is designed with MTL vapers in mind. By keeping it simple, it becomes a great starter device for ex-smokers who are new to vaping.
How Do I Fill My Pods?
It’s simple. To fill your pods, take the top cap of the device off. Then, remove the pod (it should pop out easily) and take off the rubber seal on the bottom of the pod and fill. It’s important to let the vape juice sit for roughly 10 minutes, to get the cotton saturated just like you would with other vape tanks.
Important Notes: Who Will Like the VooPoo Panda?
The VooPoo Panda All-In-One Ultra Portable System is not going to please cloud chasers. Obviously, since you’re vaping at very low wattages on the Panda, you will not see thick cloud production. You will, however, have the opportunity to get some good flavor profiles with the Panda, especially with more concentrated, nicotine salt liquids. If you’re worried about safety features, VooPoo has you covered with short circuit protection, overcharge protection, over discharge protection, and a 10-second firing cutoff.
If you like all-in-one systems and pod mod devices, the VooPoo Panda All-In-One stands out among some of the other competitors. The key reasons this device has others beat is the long-lasting charge, the 5ml liquid capacity of the pods, and the unique design that fits easily into your palm. The flavor production from the VooPoo Panda is not mind-blowing, but it does a better job than some of the other pod mods out there.
Check out more of our hardware reviews on Soupwire.
Like what you just read? Consider clicking one of the affiliate links or using the Deals page on the site. You get the chance to buy products (at a discount) from great companies, and we get a small commission when you use these links — which helps keep the lights on and pay for more great content. It’s a win-win!