good or bad soupwire emblem

If you’re a vaper, MTL is an acronym you’re all too familiar with. The style of vaping is extremely popular among members of the community, and vital for anyone looking to quit smoking. With that in mind, here are 5 of the best Mouth to Lung tanks available on the market right now!

The following list is not in any particular order, all the tanks listed below are great for Mouth to Lung vaping. Enjoy!

Silverplay 24mm RTA


  • 24mm Diameter
  • 2ml Juice Capacity
  • Quarter Turn Top Fill System
  • Two Post, Single Terminal Build Deck
  • PEEK Insulated Positive Post
  • Top Mounted Phillips Screws
  • Single Internal Air Tube on Build Deck
  • Adjustable Internal Juice Flow Control
  • Interchangeable Internal Airflow Caps
  • Screw On or Off Airflow Shields
  • 7x 1mm Airflow Slot Shield
  • 19x 0.5mm Airflow Slot Shield
  • 2x 3mm by 1mm; 1x 5mm by 1mm Airflow Slot Shield
  • Single Adjustable Airflow Slot
  • 8mm by 1mm
  • Stainless Steel and Glass Construction
  • 5mm Bore 510 ULTEM Drip Tip
  • 5mm Bore 510 DELRIN Drip Tip
  • Gold Plated 510 Pin

Price: $43.99 – $54.99

The Silverplay has a slew of features that make it one of the best mouth to lung tanks on the market. It has three interchangeable internal airflow caps, utilizes a 510 drip tip, and has adjustable juice flow control. These features allow users to dial in the airflow, and help anyone achieve that perfectly restricted draw. The Silverplay has a huge build deck, and a 2ml juice capacity, which means you’ll have room for those fancy builds, and the coils will be closer to your mouth maximizing the flavor production!

Purchase the Silverplay RTA here

Asvape Zeta 22mm RTA


  • 22mm
  • Threaded Top Fill System
  • Dual Fill Ports
  • 2.5ml Tank Section
  • Postless Dual Terminal Build Deck
  • 1mm Per Terminal
  • Ceramic Tube
  • Side Mounted Flathead Screws
  • Single Internal Air Tube on Build Deck
  • Dual Wicking Ports
  • PEEK Insulated Positive Post
  • Single Adjustable Bottom Airflow
  • 9mm by 1mm
  • 3mm Bore Drip Tip
  • Gold Plated 510 Pin
  • Squonk Pin Capable

Price: $29.90 – $44.99

The Zeta by Asvape was really designed with MTL vapers in mind. Its smaller size (22mm) really helps amplify the flavor of your e-juice, and its postless deck makes coil installs a breeze. Like most MTL toppers, the Zeta has adjustable bottom airflow and utilizes a 510 drip tip. This little guy can be used with your favorite squonk boxes as well, which really pays for itself in the long run. It’s not as loud as some of the other MTL toppers on the market, so you won’t get any weird looks from your friends either.

Purchase the Asvape Zeta RTA here

GeekVape Ammit 22mm RTA


  • 22mm Diameter
  • Two Post, Single Terminal Build Deck
  • PEEK Insulated Positive Post
  • Top Mounted Phillips Screws
  • Top to Bottom Adjustable 3D Air Flow
  • Directs Airflow from Top to Coil to Drip Tip
  • Dual-Chambered Top Cap for Airflow and Heat Dissipation
  • 12 Airflow Configurations
  • 12mm Notched Airflow Adjustment Ring
  • 2mm Narrow Air Port
  • Recommended Wattage of 15 to 20W
  • Dual Wicking Ports
  • 9mm Juice Well
  • Three Threaded MTL Drip Tips to Choose From
  • Short 3mm Diameter Delrin
  • Short 2mm Diameter Delrin
  • Tall 3mm Diameter Stainless Steel
  • Easy to Remove Drip Tip Base
  • Gold Plated 510 Threaded Contact Point

Price: $18.99 – $39.99

With a recommended wattage range of 15-20w, GeekVape set the Ammit up specifically for MTL vapers. It’s 22mm in diameter, has a huge 9mm juice well and three different drip tips specifically for MTL vaping. Plus, the Ammit offers 12 airflow configurations from the top, allowing users to dial in that airflow restriction with ease.

Purchase the Ammit RTA here

Vapefly Pixie 22mm RDA


  • 22mm Diameter
  • 24mm Tall
  • Dual Post, Single Terminal Build Deck
  • Top Mounted Hex Screws
  • 2mm by 3mm Each Terminal
  • PEEK Insulator
  • 6mm Deep Juice Well
  • Single Slot Adjustable Airflow
  • Rotating Top Cap
  • Interchangeable Airflow Inserts
  • Single Airflow Insert
  • 6.5mm by 2mm
  • Triple Airflow Insert
  • 1.5mm per Air Hole
  • 7mm Wide 510 Bore Delrin Drip Tip
  • Standard Gold Plated 510 Pin
  • Bottom Feed Pin Included

Price: $18.95 – $30.00

The Pixie is super low profile 22mm RDA. It stands just 24mm high, bringing those prebuilt coils right up to your mouth. It has unique interchangeable airflow system, allowing its 1.5mm air holes to be adjusted exactly to your liking. Although it’s not listed in the MTL category, it has all the features of one, including the 510 drip tip. This means you’ll be able to use the Pixie for mid-wattage flavor production and low wattage MTL! Plus, it’s squonk compatible, and available in a handful of pretty colors (black, gold, gunmetal, rainbow, stainless steel) to match whatever device you decide to pair it with! With a price tag of around $20, we think the Pixie is an absolute must.

Purchase the Pixie RDA here

And there you have it — the best Mouth to Lung tanks we’ve used this year. Share your favorites with us on social media!

Like what you just read? Consider clicking one of the affiliate links in this post or using the Vape Deals page on the site to make your next purchase. You get the chance to buy products (at a discount) from great companies, and we get a small commission when you use these links — which helps keep the lights on and pay for more great content. It’s a win-win!